Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

FLAMED EUCALYPTUS MAKE AN OFFER
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=17223		 Page 1 of 2
Author:  LanceK [ Sat May 17, 2008 10:00 am ]
Post subject:  FLAMED EUCALYPTUS MAKE AN OFFER
LANCE'S FRESH HOT DONUTS!
Author:  LanceK [ Sat May 17, 2008 12:09 pm ]
Post subject:  NEW STUFF ADDED -- Clearing out Lances scrap pile!
Image


NOW THAT I HAVE YOUR ATTENTION! bliss
Author:  LanceK [ Sat May 31, 2008 7:14 pm ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Williams Binding jig.
Brand new never used

350.00 SOLD paid



Woolson Neck jig. Used one time, complete. including a brand new set of plans to go with.
350.00 SOLD
Author:  L. Presnall [ Mon Jun 02, 2008 8:46 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Lance Kragenbrink wrote:
Williams Binding jig.
Brand new never used

350.00



Woolson Neck jig. Used one time, complete. including a brand new set of plans to go with.
350.00


Lance, doncha' like the neck jig? Or have you developed a nuclear solution? :D
Author:  LanceK [ Mon Jun 02, 2008 8:58 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
The jig is great! just never use it. :?
Author:  James Orr [ Mon Jun 02, 2008 9:05 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Lance, does the binding machine mount a PC 310?
Author:  Hesh [ Mon Jun 02, 2008 9:08 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
James buddy that is a rather personal question......... laughing6-hehe

I have a PC-310 mounted on my Williams jig........ :D I think that this is the best binding channel solution going these days - highly recommended! [:Y:]
Author:  LanceK [ Mon Jun 02, 2008 9:10 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
James Orr wrote:
Lance, does the binding machine mount a PC 310?

Hi James,

Yes ;)
Author:  L. Presnall [ Mon Jun 02, 2008 9:37 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Ok Lance, I'm checking the books to see if I can do the neck jig...I'm outfitting the new shop and I still have a few things in line ahead of it...
Author:  James Orr [ Mon Jun 02, 2008 12:22 pm ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
lol, you guys are awesome.

Lance, I'll take the binding jig!
Author:  LanceK [ Mon Jun 02, 2008 12:30 pm ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Sounds great James!
Ill pack it up and get you a total with shipping!

Thanks!
Author:  AndrewGribble [ Mon Jun 02, 2008 12:44 pm ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
I see glazed; got any jellies?
Author:  LanceK [ Mon Jun 02, 2008 7:29 pm ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Here ya go Andrew!

Image
Author:  AndrewGribble [ Thu Jun 05, 2008 3:00 pm ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Lance Kragenbrink wrote:
Here ya go Andrew!

Image


SWEET, I'll take a baker's dozen! Swap ya fer a bucket'o'lard? :lol:
Author:  LanceK [ Fri Jun 06, 2008 7:19 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
NEW GOODIES

I have searched the shelves and found a few cast offs, stuff I would not be using but thought that
maybe, just maybe someone could find a use, even if just for scrap wood.

First up a orphan set of Koa sides, cutaway was bent to my OMFS body, but has opened up quite a bit.
There are thin spots, and some warping, but with some effort could be made usable.
Good for making bindings and or headplates at the very least.

50.00 or make an offer.

REDUCED TO 25.00. SOLD TO WES
Author:  LanceK [ Fri Jun 06, 2008 7:23 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
A prototype boat.
I made this back and side boat about 5 years ago, it was one of three that I made while developing my E2
model. There is one small area in the inside lower bout where it stalled under the sander and its a little thin,
but very stable. End Graft slot is cut for a standard width binding 1/4"
Slap a top on it and your on your way!

Master Grade East Indian

100.00 or will entertain trade offers SOLD LAURIE
Author:  LanceK [ Fri Jun 06, 2008 7:27 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Box of 10 sets of D'Addario EJ17 Mediums
Phosphor Bronze.

Retail 59.99
Will sell for 30.00 SOLD to PETER
Author:  LanceK [ Fri Jun 06, 2008 7:33 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Box of 10 sets of D'Addario EXP 80/20 Bronze Acoustic Strings Mediums



Will sell for 50.00 SOLD
Author:  LanceK [ Fri Jun 06, 2008 7:35 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Inlaid fretboard.
Off Ebay

50.00 SOLD KEN HODGES
Author:  LanceK [ Fri Jun 06, 2008 7:40 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Old cracked Cocobolo rim set. OMFS style
Pretty rough shape, maybe good for scrap wood parts.
Maybe someone could rescue it?
I have a back that (may) fit it that I will toss in for free.

25.00 SOLD JIMW
Author:  AndrewGribble [ Fri Jun 06, 2008 7:45 am ]
Post subject:  Re: LANCE'S FRESH HOT DONUTS!
Lance Kragenbrink wrote:
Box of 10 sets of D'Addario EXP 80/20 Bronze Acoustic Strings Mediums



Will sell for 50.00


I'll take these ten Lance! [:Y:]

You got it Andrew!
Author:  LanceK [ Fri Jun 06, 2008 8:09 am ]
Post subject:  Re: NEW STUFF ADDED -- Clearing out Lances scrap pile!
You got it Andrew!
Author:  JimWomack [ Fri Jun 06, 2008 9:32 am ]
Post subject:  Re: NEW STUFF ADDED -- Clearing out Lances scrap pile!
Lance, I'll take a chance on the Cocobolo rim set and back, thanks.
Author:  KenH [ Fri Jun 06, 2008 10:26 am ]
Post subject:  Re: NEW STUFF ADDED -- Clearing out Lances scrap pile!
I'll take the inlaid fretboard for $50
Author:  LanceK [ Fri Jun 06, 2008 10:35 am ]
Post subject:  Re: NEW STUFF ADDED -- Clearing out Lances scrap pile!
Ken fretboard is yours

JimW Coco rim set + back is yours

Thanks!

I will get totals on everything with shipping ASAP
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/